Jenn-air W10253462A Manuel d'utilisateur télécharger pdf (Page 13)

4. Remove 4 locknuts on the motor side of the blower and

remove the bracket.

5. Lift and rotate the motor 180° to reposition the electrical

connection.

6. Rotate bracket 180° and secure with 4 locknuts.

7. Remove the bracket from the other side of the blower motor,

rotate 180° and secure with 4 locknuts.

8. Position 2 wood spacers and mount them to the floor.

9. Mount blower motor to wood spacers using 4 - #8 x ¾" hex

head screws provided.

NOTE: Vent system will be connected after range has been

moved into it’s final location. “See Connect Range to

Downdraft System” section.

10. Go to the “Electrical Connection” section.

View from Motor Side of Blower

A. Electrical connector

Top View

A. 2" x 4" (5.0 x 10.2 cm) wood spacers

B. 2

⁷⁄₉

" (7.3 cm) from back wall to edge of wood spacer

C. 8¾" (22.2 cm)

D. 2

⁵⁄₁₆

" (5.8 cm) centerline of opening to wood spacer

Top View

A. Wood spacers

B. Mounting bracket

C. Blower

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Pas de commentaire

Jenn-air W10253462A Manuel d'utilisateur Page 13