Jenn-Air JGR8850 Manuel d'utilisateur télécharger pdf (Page 27)

Before You Call for Service

Oven will not self-clean.

I_ Check to make sure controls are set properly.

• Check to make sure the cycle is not set for a delayed start.

• Check if door is closed.

Oven did not clean properly.

• Longer cleaning time may be needed.

• Excessive spillovers, especially sugary and or acid foods,

were not removed prior to the self-clean cycle.

Oven door will not open after self-clean cycle.

• Oven interior is still hot. Allow about one hour for the

oven to cool after the completion of a self-clean cycle. The

door can be opened when the LOCK indicator word is not

displayed.

Moisture condensation on oven window.

€ This is normal when cooking food high in moisture.

• Excessive moisture was used when cleaning the window.

Strong odor or light smoke when oven is turned on.

• This is normal for a new range and will disappear after a

few uses. Initiating a clean cycle wil! "burn ofF' the smells

more quickly.

• Turning on a ventilation fan will help remove the smoke

and/or odor.

O Excessive food soils on the oven bottom. Use a self-clean

cycle.

"F" plus a number appears in display.

• This is called a fault code. If a fault code appears in the

display and beeps sound, press the Stop/Clear pad. If the

fault code and beeps continue, disconnect power to the

appliance and call an authorized servicer.

1 2 ... 22 23 24 25 26 27 28

Pas de commentaire

Jenn-Air JGR8850 Manuel d'utilisateur Page 27